1、數控面板加熱

1. CNC panel heating

　　一般實驗室使用的數控超聲波清洗機，帶加熱功能的機型，為數控按鈕加熱。數控區顯示當前溫度，可設置溫度值。當達到加熱值時，自動停止加熱。這種加熱一般用硅膠板加熱。

The CNC ultrasonic cleaning machine commonly used in laboratories, with a heating function model, is equipped with a CNC button for heating. The CNC area displays the current temperature, and the temperature value can be set. When the heating value is reached, the heating automatically stops. This type of heating is usually done using a silicone plate.

　　2、機械溫度控制

2. Mechanical temperature control

　　普通超聲波清洗機一般采用機械控溫，即旋鈕調節溫度。

Ordinary ultrasonic cleaning machines generally use mechanical temperature control, which means adjusting the temperature with a knob.

　　3、溫控器加熱

3. Temperature controller heating

　　分體式超聲波清洗機可根據使用情況通過溫控器進行加熱。

The split type ultrasonic cleaning machine can be heated through a temperature controller according to the usage situation.

　　使用方法如下：按下加熱開關，溫控器將顯示測量溫度和控制溫度。上方顯示的是測量溫度，下方顯示的是控制溫度。當被測溫度低于控制溫度時，溫控器上的out燈亮，加熱指示燈亮，設備處于加熱狀態;當被測溫度高于控制溫度時，溫度控制儀表上的out燈滅，加熱指示燈滅，設備停止加熱。

The usage method is as follows: Press the heating switch, and the temperature controller will display the measured temperature and the controlled temperature. The temperature measurement is displayed above, and the temperature control is displayed below. When the measured temperature is lower than the control temperature, the out light on the temperature controller lights up, the heating indicator light lights up, and the equipment is in a heating state; When the measured temperature is higher than the control temperature, the out light on the temperature control instrument goes out, the heating indicator light goes out, and the equipment stops heating.

　　控制溫度設置方法：按撥號鍵設置控制溫度，控制溫度為58度。這種類型一般采用加熱管加熱。

Temperature control setting method: Press the dial key to set the control temperature to 58 degrees. This type generally uses heating tubes for heating.

以上就是有關：超聲波清洗機 的介紹，想了解更多的內容請點擊：http://www.qyqcc.cn 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to ultrasonic cleaning machines. To learn more, please click: http://www.qyqcc.cn We will wholeheartedly provide you with full score service. Welcome to call us!