The main principle of a multi slot ultrasonic cleaning machine during operation is to use its transducer to convert the sound energy of the power ultrasonic frequency source into mechanical vibration during operation. So, what cleaning requirements do slot ultrasonic cleaning machines need to pay attention to when cleaning? Below, the editor will provide a detailed introduction for everyone. Come and follow us to learn more.

多槽超聲波清洗機在運行時當聲壓或者是聲強受到壓力達到程度的時候，這樣在運行時氣泡就會迅速膨脹，然后就會又突然閉合，在這段過程中，其氣泡閉合的瞬間產生沖擊波，使氣泡周圍產生1012-1013pa的壓力及局調溫，這種超聲波空化所產生的巨大壓力能破壞不溶性污物而使他們分化于溶液中，蒸汽型空化對污垢的直接反復沖擊。

When the sound pressure or sound intensity of the multi slot ultrasonic cleaning machine reaches a certain level during operation, the bubbles will rapidly expand and then suddenly close again. During this process, the moment the bubbles close, a shock wave is generated, causing a pressure of 1012-1013pa and local temperature adjustment around the bubbles. The huge pressure generated by this ultrasonic cavitation can damage insoluble pollutants and cause them to differentiate into solutions, The direct and repeated impact of steam cavitation on dirt.

多槽超聲波清洗機的破壞污物和清洗件表面的吸附，在進行操作時會在另一面能夠引起污物層的疲勞破壞而被剝離，氣體型氣泡的振動對固體表面進行擦洗，污層一旦有縫可鉆，氣泡立即“鉆入”振動使污層脫落，由于空化作用，兩種液體在界面迅速分散而乳化。

The destruction of dirt and the adsorption on the surface of the cleaning part by the multi slot ultrasonic cleaning machine can cause fatigue damage to the dirt layer and be peeled off on the other side during operation. The vibration of gas type bubbles can scrub the solid surface. Once the dirt layer has cracks that can be drilled, the bubbles immediately "drill in" and vibrate to cause the dirt layer to fall off. Due to cavitation, the two liquids quickly disperse and emulsify at the interface.

當固體粒子被油污裹著而粘附在清洗件表面時，油被乳化、固體粒子自行脫落，超聲在清洗液中傳播時會產生正負交變的聲壓，形成射流，沖擊清洗件，同時由于非線性效應會產生聲流和微聲流，而超聲空化在固體和液體界面會產生高速的微射流。

When solid particles are wrapped in oil and adhere to the surface of the cleaning part, the oil is emulsified and the solid particles fall off on their own. When ultrasound propagates in the cleaning solution, it generates a positive and negative alternating sound pressure, forming a jet that impacts the cleaning part. At the same time, due to nonlinear effects, sound flow and micro sound flow are generated, while ultrasonic cavitation generates high-speed micro jet at the interface between solid and liquid.

多槽超聲波清洗機在程度上能夠破壞污物，在進行使用時能夠除去或者是削弱邊界污層，在運行時可以增加攪拌和擴散的作用，這樣就可以加速可溶性污物的溶解，強化化學清洗劑的清洗作用。由此可見，凡是液體能浸到且聲場存在的地方都有清洗作用，其特點適用于表面形狀非常復雜的零件的清洗。尤其是采用這一技術后，可減少化學溶劑的用量，從而大大降低環境污染。

The multi slot ultrasonic cleaning machine can to some extent damage dirt, remove or weaken the boundary dirt layer during use, and increase stirring and diffusion during operation, which can accelerate the dissolution of soluble dirt and strengthen the cleaning effect of chemical cleaning agents. From this, it can be seen that any place where liquid can be immersed and the sound field exists has a cleaning effect, and its characteristics are suitable for cleaning parts with very complex surface shapes. Especially after adopting this technology, the amount of chemical solvents can be reduced, thereby greatly reducing environmental pollution.

感謝您的閱讀，此文的文章來源：全自動超聲波清洗機更多的內容和問題請點擊: http://www.qyqcc.cn 我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is: Fully automatic ultrasonic cleaning machine. For more information and questions, please click on: http://www.qyqcc.cn We will continue to work hard to provide you with services. Thank you for your support!